20NiCr14 is a kind of alloy structural steel . 20NiCr14 has good hardenability, uniform intensity can be obtained over a large cross-section range. After quenching or quenching and tempering, we have good mechanical properties.

20NiCr14 Correspond steel:

AISI 3316,GB 20CrNi3A

20NiCr14 chemical composition(％):

C: 0.17 ~ 0.25

Si : 0.17 ~ 0.37

Mn: 0.30 ~ 0.60

Cr: 0.60～0.90

Ni:2.75～3.25

20NiCr14 Mechanical Properties:

Yield strength σs (MPa): ≥835

Impact toughness αku (J / cm2): ≥98

Round bar : Diameter : 1mm-2000mm

Square bar :Size: 50mm * 50mm～600mm *600mm

Plate steel/flat bar :Size: Thickness: 0.1mm～800mm Width: 10mm to 1500mm

Tube/pipe: Size: OD: 6-219mm WT: 1-35 mm.

Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm

Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm

Length: We can supply any length based on the customer's requirement.

20NiCr14 Application:

20CrNi14 is as gears working under high load conditions, the shaft, worm and bolts, pins, etc.

 Contact sales:

Website : http://www.firsteelplate.com/

Email : seedsteel@hotmail.com

Tel : +86-371-55031185

Fax: +86-371-86220366